Thank you very much,

that you have chosen a Securepoint product.

Interface A1

For the initial installation, connect the computer to interface A1 on the appliance.

HDMI connection

There is an HDMI connection on the back for connecting a monitor.

USB ports

A keyboard, for example, can be connected directly via the USB ports.

All information about your RC100 G5 (Rev. 1)

Important notes

You need a valid licence to be able to operate the appliance. You cannot access the web interface without a licence key. Download your licence at my.securepoint.de.

Update the UTM firewall to the latest firmware before putting it into operation.

Here you will find information on licensing:
Securepoint Licence Agreement

Connect the appliance to the mains and start it
Configure your own computer with an IP address from the range: 192.168.175.2 to 192.168.175.254 (network mask: 255.255.255.0).
Connect your own computer to interface A1 on the appliance.
Call up the web interface of the appliance at 192.168.175.1.
Login data for factory setting
User name: admin
Password: insecure
The installation wizard guides you through the setup of the UTM firewall.

Installation instructions (Wiki)

Restore instructions (Wiki)

UTM Documentation (UTM)

Manual (PDF)

KEINE SERIENNUMER

Serial number search
More information about the hardware and the warranty status.

data and videos

Specifications RC100 G5 (Rev. 1)

Maximum 25 users

LAN ports: 4 x 1 GBit/s
WiFi/WLAN: 2,4 oder 5 GHz, 802.11 n/ac
LTE/UMTS (optional): Main line or fallback
Connections: HDMI, 2 x USB 2.0
Hard disk: SSD
Form factor: Desktop (B 21 x H 4,4 x T 10,5 cm)
Power supply: External: 110-240V; 50-60Hz; 1,2 A; optional second power supply unit; power connection: 2x 12 V; 3,34 A; 40 W; screwed
Power consumption max.: ~46 Watt
Temperature range: 0°C - 40°C (operation) / -20°C - 60°C (storage)
Humidity: 10 % ~ 80 %, non-condensing
Firewall throughput: 3740 MBit/s
VPN throughput: 690 MBit/s
TLS interception: 1800 MBit/s
AES hardware accerleration: yes (Intel)
Expansion options:
- Second power supply unit for redundant power supply
- LTE/UMTS: Main line or fallback
- Rackmount kit for mounting in 19" rack, 1U
- Premium rackmount kit for mounting in 19" rack, 1U; with LAN port lead-out and holder for up to two power supplies

19“ Rack-Montage

Zum Einbau der Firewall in ein 19" Rack stehen zwei 1HE-Optionen zur Verfügung.

Rackmount-Kit Basic ist die einfachste Möglichkeit für den Einbau in eine 19" Rack.
Rackmount-Kit Premium kommt mit Herausführungen der 4 LAN-Port nach Vorne und einer Halterung für bis zu zwei Netzteile.

Die Premium-Variante ist ausschließlich für die Hardware der Generation "G5" konzipiert.

LTE-Upgrade

Mit diesem leistungsstarken 4G/LTE-Modem im USB-Gehäuse (inklusive zwei Antennen) kann der Funktionsumfang der Firewall einfach erweitert werden. Die Mobilfunkverbindung lässt sich als Hauptleitung oder Fallback konfigurieren und benötigt eine gesonderte SIM-Karte mit aktivem Vertrag.

Data sheet hardware (PDF)

UTM firewall brochure (PDF)

For reliable operation of our hardware throughout its life expectancy, it must be operated within its specifications.

The maximum ambient temperature for operation is 40°C* and minimum operation is possible at 0°C*.

During installation, ensure that the firewall is mounted/set up as follows:

Sufficient supply of cool air
Do not cover the unit
The unit must be as free-standing as possible

When mounting in a network cabinet, pay particular attention to:

Ventilate the cabinet
Do not place the appliance under or above heat-emitting appliances
Do not allow heat to build up

*The relative humidity must be between 10% and 80% and must not condense.